Size Guide
Getting the right fit matters — especially with heritage-style footwear and garments.
Use this guide to find your best fit before placing your order.
Tap a section to jump straight to it:
Boot Sizing
How do I choose my boot size?
For most customers, order your usual US boot size. If you normally wear a half size that is not available, size up — for example, if you wear US 8.5, choose US 9.
If you have wide feet, a high instep, or usually wear EE/EEE width, we recommend sizing up or choosing a model available in wide width.
For the most accurate fit, measure your foot length in mm and compare it with our size chart below.
Should I use my sneaker size or boot size?
Use your usual boot size, not your sneaker size. Sneakers fit differently from heritage boots. If you know your size in Red Wing, Wesco, Whites, Chippewa, or similar brands, that is usually a better reference than athletic shoes.
If you are unsure, send us your foot length, foot width, and usual boot size before ordering.
Do your boots run true to size?
Our boots are generally true to size. However, fit varies by model, foot width, and instep height. Engineer boots in particular may feel roomy in the toe but snug across the instep because they are pull-on designs.
If you are between sizes, have wide feet, or plan to wear thick socks or orthotic inserts, please contact us before ordering.
Do you check sizing before shipping?
Yes. We manually review orders before shipping whenever sizing may be uncertain. If we think the selected size may not be the best fit, we may contact you by email before processing the order. Please make sure your email address is correct when placing your order.
Do you offer extended or wide sizes?
Selected boot models are available in extended sizes (up to US 15) and some offer E/EE widths. Extended-size orders may require additional production time and a price adjustment depending on the model.
Custom boot orders — including special sizes, leather changes, outsole changes, and other non-standard modifications — are final sale unless there is a confirmed manufacturing defect.
Boot Size Chart
Tip: Measure both feet and use the larger measurement when choosing your size. If your foot length falls between two sizes, go with the larger size.
| Length (mm) | Width (mm) | Arch (mm) | US Size | UK Size | EU Size |
| 220 | 84 – 86 | 225 – 230 | 4 | 3 | 35.5 |
| 229 | 87 – 89 | 233 – 238 | 5 | 4 | 37 |
| 237 | 90 – 92 | 241 – 246 | 6 | 5 | 38 |
| 246 | 94 – 96 | 249 – 254 | 7 | 6 | 39 |
| 250 | 95 – 97 | 253 – 258 | 7.5 | 6.5 | 40 |
| 254 | 97 – 99 | 257 – 262 | 8 | 7 | 40.5 |
| 258 | 98 – 100 | 261 – 266 | 8.5 | 7.5 | 41 |
| 262 | 100 – 102 | 265 – 270 | 9 | 8 | 42 |
| 266 | 101 – 103 | 269 – 274 | 9.5 | 8.5 | 42.5 |
| 271 | 103 – 105 | 274 – 279 | 10 | 9 | 43 |
| 275 | 105 – 107 | 278 – 283 | 10.5 | 9.5 | 44 |
| 279 | 106 – 108 | 282 – 287 | 11 | 10 | 44.5 |
| 283 | 108 – 110 | 286 – 291 | 11.5 | 10.5 | 45 |
| 288 | 110 – 112 | 291 – 296 | 12 | 11 | 46 |
| 296 | 113 – 115 | 299 – 304 | 13 | 12 | 47 |
| 305 | 117 – 119 | 308 – 313 | 14 | 13 | 48 |
| 314 | 120 – 122 | 317 – 322 | 15 | 14 | 49.5 |
How to Measure Your Feet
For the most accurate results: stand up while measuring (feet splay under body weight), wear the socks you plan to wear with your boots, and distribute your weight evenly on both feet. Do not measure while sitting.
1. Foot Length (Heel to Toe)
Place a piece of paper against a wall on a flat, hard floor. Stand with your heel touching the wall. Mark the longest part of your foot (usually the big toe or second toe). Measure from the wall to the mark in centimeters.
2. Foot Width (Widest Part)
Identify the ball of your foot — the widest area just below your toes. With your foot flat on the ground, measure the straight-line distance between the inner joint (big toe side) and the outer joint (pinky toe side).
3. Instep Girth (Arch Volume)
This is the most critical measurement for comfort, especially if you have high arches. Locate the highest part of your foot's arch, then wrap a flexible measuring tape around it — from the floor, over the top of the foot, and back down. Keep it snug but not compressing the skin.
Jacket Sizing
How do I choose my jacket size?
Choose your size based on your body measurements and the garment measurements on each product page. For the best fit, compare with a jacket you already own and like — measure it flat across the chest, shoulders, sleeve, and back length.
If you are unsure, send us your height, weight, chest measurement, shoulder width, and usual jacket size. We will help recommend the best size.
Do your jackets fit small?
Some of our jackets have a vintage-inspired fit and may feel smaller or shorter than modern casual jackets. Leather jackets should fit close to the body but should not feel restrictive across the chest, shoulders, or upper arms.
If you are between two sizes, have broad shoulders, or prefer layering, we usually recommend sizing up.
Jacket Size Conversion
| Size in number (US/UK) | Size in number (EU) | Brake House |
| 34 | 44 | S |
| 36 | 46 | M |
| 38 | 48 | L |
| 40 | 50 | XL |
| 42 | 52 | 2XL |
| 44 | 54 | 3XL |
| 46 | 56 | 3XL - |
How to Measure a Jacket
Shoulder width: Measure straight across from where the shoulder seam meets the sleeve on one side to the other.
Chest: Measure from armpit to armpit, just below the sleeve seam.
Length: Measure from the base of the back collar down to the bottom hem.
Sleeve length: Measure from where the shoulder seam meets the sleeve down to the end of the cuff.
If your chest or shoulder measurements fall between two sizes, choose the larger size for layering comfort — especially if you plan to wear thick garments underneath. For a sharper, more tailored look, choose the closer fit. Always compare your measurements to the garment's size chart rather than relying solely on your usual size label.
Body Measurement Guide
Use a flexible measuring tape and wear minimal clothing for the most accurate results.
Shoulder: Measure straight across from the outer edge of one shoulder bone to the other.
Tip: To find the correct "outer edge," feel for the point where the hard shoulder bone ends and the soft, hollow dip begins before the arm starts.
Chest: Wrap the measuring tape around the fullest part of your chest, keeping it level under your armpits and across your shoulder blades.
Important: Keep your arms hanging naturally at your sides while measuring. Do not puff out your chest or inhale deeply.
Jeans Sizing
How do I choose my jeans size?
All of our bottoms are raw / unwashed denim, which means they will shrink after the first wash. Our size charts list post-wash measurements, so match your size to these numbers rather than the raw garment.
If you are between waist sizes, choose the larger size for comfort — especially if you prefer a more relaxed fit. For higher-rise cuts, consider both your waist and hip measurements. Also check thigh and leg opening measurements to match your preferred silhouette and mobility.
How to Measure Jeans
Waist: Measure straight across the waistband from one edge to the other, with front and back waistlines aligned.
Hip: Measure horizontally across the widest part of the pants, about 8 cm (3 inches) above the crotch seam. Keep the tape parallel to the bottom hem.
Front Rise: Measure from the crotch seam up to the top edge of the front waistband. This indicates how high the pants sit in the front.
Back Rise: From the crotch seam, measure up to the top edge of the back waistband. This helps assess coverage and comfort in the back.
Thigh: Measure straight across from the crotch seam to the outer edge of the leg. Keep the tape level.
Inseam: Measure from the crotch seam straight down the inside of the leg to the hem. This determines inner leg length and overall leg fit.
Length: Measure from the top of the waistband all the way down to the bottom hem.
Leg Opening: Measure across the bottom hem from edge to edge. This tells you whether the style is slim, straight, or wide-legged.
Still unsure about sizing?
Use our contact form — we're here to help.